Homepage      About Us      Products      Industries Served     Support      Contact                                                               

 

Products

   Diverter Valve

 

 

Diverter valves  are used in pneumatic conveying systems to route granels, powders or pellets in the pipeline with minimum degradation. Diverter valves are both ideal for pressure and vaccum bulk solid handling systems. Different diverter valve models are available for different appliacations

Diverter Valve Models

 

Flap Type Gravity Diverter Valve

Flap diverter valves have one inlet and two outlet ports. Conveyed material is diverted with the help of gravity and flap. Normal steel, stainless steel and hardox steel models are available.

 

  Flap type diverter valve

Flap Type Pneumatic Conveying Diverter Valve

Flap type pneumatic conveying diverter valves have one inlet and two outlet ports. Conveyed material is diverted with the help of conveying air and flap. Normal steel, stainless steel and hardox steel models are available.

Pneumatic conveying, flap type diverter valve

Plug Type Diverter Valve

Also known as tunnel diverter valve. The diverter valve consists of a rugged carbon steel cast body which houses a cast twin pipe plug between a pair of end covers. Bulk solids handled pass from one line through a tunnel within the plug to either of the two outlet lines.  The twin pipe plug combines the benefits of both a constant and a low rotational angle. The material stream is diverted to the selected outlet by rotating the plug through 43°. For abbrassive materials and food applications the valve parts are constructed from 304 -316 stainless steel which ensures maximum durability and safety. Pipe connections can be supplied as either plain pipe ends or flanged as required.

   pneumatic conveying plug type diverter valve    Plug diverter valve

Slide Gate Valve

Slide gate valves are generally used below silo, tank, conveyors and hoppers. Sliding gate allows to control the gravitational flow of granular materials. Carbon steel, stainless steel and hardox steel construction are available for slide gate valves for wide range of applications.

   Slide gate valve

Multiport Diverter Valve

Multiport diverter valves are used in pneumatic conveying systems where the product flow should be diverted to multiple directions. Multiple port diverting eliminates the need of using huge number of diverters along the conveying line. The valve is operated with an electrical motor and reducer. A PLC controller controls the system.

Multiport valve

Pinch Valve

Pinch valves are used to control the flow of bulk solids in pneumatic conveying lines. Actuation of the valve, the pinching action is accomplished by air pressure placed on the sleeve. The flexible sleeve tightly closes the line. When the valve is open, there is no internal parts or geometries that can block or slow down the flow.

Pinch valve

Atex Diverter Valves

Atex approved diverter and flow control valves are used in applications where the dust explosion risk exist.

Atex Diverter Valve

 

Industrial Solutions

Bulk Solid Handling Systems

Pneumatic Conveying Systems

Dust Collection and Filter Systems

 

Mechanical Parts and Equipment

Gear and Gearbox

Rotary Airlock

Diverter Valve

Roots Blower

Jet Filter

Bag Dump Station

Big Bag Discharge Station

Silo Equipment

Silo Control Systems

Screw Feeder

Loading Spout

Custom Machines Mechanisms

Software Development

 

Homepage

About Us

Products

Industries Served

Support

Contact

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Polimak Grup Endüstriyel Üretim San. AŞ.