FT Series Rotary Feeder
Flow through rotary airlocks are used in wide range of applications. The material enters from the top and exits from the bottom flange of rotary feeder.
BT Series Rotary Feeder
Blow through rotary feeders are used in pneumatic transport systems. They are suitable for transferring sticky powdered materials. The material enters from the top and exits from side flange and transferred to conveying pipe.
OS Series Rotary Feeder
The Off Set type also referred as side entry type rotary feeders are used for preventing crackage of delicate materials like sunflower seed and peanut. These models are also suitable for hard to shear pellets like nylon or plastic granules.
To protect bearings from damage of abbrassive and dusty materials, the bearing housing is mounted outside of side flanges. Packing seals are used in these models.
Flange Connection For Piping
Blow through rotary feeders have optional flange connections for easier installation on pneumatic conveying pipelines
Stainless Steel Rotary Feeder
Rotary feeders can be built from AISI 304 and 316 steel for food grade and chemical applications
Hardox Rotary Feeders
For very abbrasive bulk solids like fly ash, cement and sand, the rotor blades and inner housing of airlock are built from hardox steel.
Rotary Feeders For High Temperature Applications
The casing, rotors, bearings and seals of rotary feeders are built to withstand elevated temperatures.
Atex approved rotary feeders are used in applications where the dust explosion risk exist. Polimak Atex series rotary feeders are certified with 10 bar explosion tests. All components of rotary feeders comply with Atex regulations and provide ex-proof characteristics.
Motor and Gerbox Connections
Worm Gear Reducer Connection
Worm gear reducers are installed on rotary feeder shaft
Chain Gear Connection
Chain gears are installed on rotary feeder and gearbox.
Closed End Rotors
Closed end rotors reduce air leakage. They prevent wear on side covers of airlock when handling abrasive materials.
Open End Rotors
Open end rotors are generally used in blow through type rotary feeders installed on pneumatic conveying applications.
Adjustable Bladed Rotors
Adjustable blades are used in handling abbrassive materials for longer operational life.
Elastic Polyurethane Bladed Rotors
Elastic blades are used for bulk solids that have large particle sizes and also used for abbrassive powders.
The scalloped rotor design is suitable for sticky materials. They are also used in food grade applications.
Optional Accessories, Special Applications
Inlet Slide Gate
The slide gate is used for adjusting material flow to the rotary feeder.
Pneumatic Conveying Line Connection Adapter
These rotary feeder outlet adapters are used for connecting the FT and OS series airlocks to pneumatic conveying pipeline
Dosage Control System
Different materials can be mixed with precision with the help of rotary feeders. The volumetric dosing system is controlled by PLC and computer. Dosage control software lets the user adjust the mixing percentages.
Custom Designed Rotary Feeders
Polimak can design and produce airlocks for custom applications in very short periods of time.
Handled Materials By Airlock
Cement, calcite, ash, glass powder, marble powder, plastic pellets, sawdust, pvc, fly ash, coal, coal dust, wheat, flour, barley, feed, seed, corn, chickpea, bean, soy bean, sesame, rice, rice flour, dried fruit, nuts, peanut, almond, sunflower seed, cotton seed, grain cereals, chestnut, coffee grain, coffee powder, sugar, salt, spice.